No products in the cart.
eSun, eSun PLA+
eSun PLA+ wood 0,5KG
Availability:
Out of stock
Wood
This is a PLA based 3D printing material with cool appearance like wood. It was the characteristics of easy to print and smooth surface as PLA.It tilize active foaming technology to achieve like-wood appearance with low-density PLA of 0.7g/cm3.
Description
This is a PLA based 3D printing material with cool appearance like wood. It was the characteristics of easy to print and smooth surface as PLA.It tilize active foaming technology to achieve like-wood appearance with low-density PLA of 0.7g/cm3.
€ 14.52 incl. VAT 21%
Out of stock
Join Waitlist
We will inform you when the product arrives in stock. Please leave your valid email address below.
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | Wood |
| Density(g/cm3) | 0.7 |
| Heat Distortion Temp(℃,0.45MPa) | 45 |
| Melt Flow Index(g/10min) | 17(190℃/2.16kg) |
| Tensile Strength(MPa) | / |
| Elongation at Break(%) | / |
| Flexural Strength(MPa) | / |
| Flexural Modulus(MPa) | / |
| IZOD Impact Strength(kJ/㎡) | / |
| Durability | 4/10 |
| Printability | 9/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 210 – 230℃ Recommended temperature：210℃ |
| Bed temperature(℃) | 45 – 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
Related products
- DWS Systems, Resins
DWS Systems DS3000
- High-Precision Fit: Achieve precision and accuracy like never before with our SLA 3D printing material.
- Design, Analyze, and Develop: Seamlessly perform design, analysis, and development tasks directly on your model.
- Class I Biocompatible Material: Our material is classified as Class I, suitable for surgical guides, adhering to Rule 5, Annex IX of Medical Devices Directive 93/42/EEC.
- 0,33g cartridges: for XFAB 3D Printers
SKU: 18531
