fbpx

NextDent Base

236.00 (vat excl.)

Print Denture Base applications

NextDent Denture 3D+ is a biocompatible Class IIa material suitable for printing all types of removable denture bases. This material has significant lower shrinkage compared to standard PMMA denture base materials. Shrinkage can be compensated by using dental software resulting in excellent fitting denture bases.

This material has excellent mechanical properties and is comparable to conventional denture base materials. Available in 5 new colors: Dark Pink, Light Pink, Opaque Pink, Red Pink and Translucent Pink.

Available on backorder

Operation
  • Suggested to use the resin indoor under ventilated situation.
  • Avoid exposure to sunlight
  • Store the resin in opaque bottles
  • Do not mix used and non-used resin
  • Keep away from kids.
  • Do not dump the resin. Place cured resin and recycle it as general plastic garbage.
Safety Rules
  • Do not eat or swallow the resin. Visit hospital if necessary.
  • Wear protective goggles to avoid of eye contact with resin. Wash your eyes with water and go to hospital if necessary.
  • Resin might cause slight irritation to skin or may cause allergy reactions. Wear protective gloves when handling the resin. Stop using if allergy occurred.
  • Resin has a slight odor. We strongly recommend to use it under ventilated condition.
  • Suggested safety wear: gloves, mask, goggles, and lab coat.
  • Keep resin in room temperature (15 – 35C) and dry environment.

Weight 1 kg
Scroll to Top