Dark Light

eSun PLA Natural 1KG


In stock


PLA is an environment-friendly material that is easy to print and has smooth surface.Compared with ABS, PLA has higher rigidity and strength similar to PC, and does not need to close the cavity, low shrinkage rate, no warping, no cracking, and can print large size model;No pungent smell when printing, safe and environmental protection.Approved by FDA, safer to use;It can be used for conceptual model, rapid prototyping, and metal parts casting.

 $ 16.78 Excl. TAX

In stock

Filament Properties Table
Density(g/cm3) 1.2
Heat Distortion Temp(℃,0.45MPa) 53
Melt Flow Index(g/10min) 3.5(190℃/2.16kg)
Tensile Strength(MPa) 72
Elongation at Break(%) 11.8
Flexural Strength(MPa) 90
Flexural Modulus(MPa) 1915
IZOD Impact Strength(kJ/㎡) 5.4
Durability 4/10
Printability 9/10
Recommended printing parameters
Extruder Temperature(℃) 190 – 230℃
Recommended temperature:215℃
Bed temperature(℃)  45 – 60°C
Fan Speed  100%
Printing Speed  40 – 100mm/s
Heated Bed  Optional
Recommended Build Surfaces Masking paper, PVP solid glue, PEI
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.