No products in the cart.
eSun, eSun ABS+
eSun ABS+ filament Blue 1kg
Availability:
Out of stock
Description
Based on the modification of ABS material, it has higher mechanical properties, lower odor and lower shrinkage rate than conventional ABS materials. With high toughness and high impact resistance, ABS+ can be used to print sturdy and durable parts; low VOC volatile content, low odor during printing, comfortable printing without pressure; low shrinkage, not easy to warp and crack during printing.
Selling point
Heat resistance
Sturdy and durable
High toughness
Low odorLow shrinkage
High impact resistance
Excellent printability
Esun ABS + Filament Color
€ 16.49 incl. VAT 21%
Out of stock
Join Waitlist
We will inform you when the product arrives in stock. Please leave your valid email address below.
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | ABS+ |
| Density(g/cm3) | 1.06 |
| Heat Distortion Temp(℃,0.45MPa) | 73 |
| Melt Flow Index(g/10min) | 15(220℃/10kg） |
| Tensile Strength(MPa) | 40 |
| Elongation at Break(%) | 30 |
| Flexural Strength(MPa) | 68 |
| Flexural Modulus(MPa) | 1203 |
| IZOD Impact Strength(kJ/㎡) | 42 |
| Durability | 8/10 |
| Printability | 8/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 230 – 270℃ Recommended temperature：240℃ |
| Bed temperature(℃) | 95 – 110°C |
| Fan Speed | 0% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Required |
| Recommended Build Surfaces | High temperature tape, PVP solid glue |
| Weight | 1 kg |
|---|---|
| Brands | |
| Esun ABS + Filament Color | Blue |
