No products in the cart.
eSun, eSun Engineering filaments
eSun ePLA-ST filament natural white 1kg
Availability:
In stock
ePLA-ST
High impact resistance, high elongation at break, high bonding strength and high printing accuracy.The toughness is better than PETG, and it has good printability nad toughness of PLA, suitable for printing mechanical parts with toughness and precision requirements.
Description
High impact resistance, high elongation at break, high bonding strength and high printing accuracy.The toughness is better than PETG, and it has good printability nad toughness of PLA, suitable for printing mechanical parts with toughness and precision requirements.
Sellingpoint
High impact resistance
PETG Better Toughness than PETGExcellent printability
$ 18.10 incl. VAT 0%
In stock
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | ePLA-ST |
| Density(g/cm3) | 1.25 |
| Heat Distortion Temp(℃,0.45MPa) | 52 |
| Melt Flow Index(g/10min) | 3.2（190℃/2.16kg） |
| Tensile Strength(MPa) | 34.3 |
| Elongation at Break(%) | 90 |
| Flexural Strength(MPa) | 43 |
| Flexural Modulus(MPa) | 1477 |
| IZOD Impact Strength(kJ/㎡) | 63 |
| Durability | 4/10 |
| Printability | 9/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 200 – 230℃ Recommended temperature：215℃ |
| Bed temperature(℃) | 45 – 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
