Dark Light
, ,

SUNLU PLA Glow in the dark – White 1KG

Availability:

Out of stock


Experience the magic of Glow in The Dark White PLA, infused with phosphorescent materials that illuminate in the dark after absorbing light energy. The glow effect is intensified under UV light, although prolonged exposure to direct sunlight should be avoided to maintain color longevity.

​​Precision is paramount with our Glow in The Dark PLA filaments, adhering to strict tolerances. The filament boasts a diameter of 1.75mm with a remarkable dimensional accuracy of + / – 0.03 mm. Each spool weighs 1 kg (2.2lbs).

Sunlu PLA Glow Colour:
Blue
Green
White

$ 30.15 incl. tax
$ 24.51 excl. tax

Out of stock

Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.

No fields found, please go to settings & save/reset fields

Description ​

Experience the magic of Glow in The Dark White PLA, infused with phosphorescent materials that illuminate in the dark after absorbing light energy. The glow effect is intensified under UV light, although prolonged exposure to direct sunlight should be avoided to maintain color longevity.

​​Precision is paramount with our Glow in The Dark PLA filaments, adhering to strict tolerances. The filament boasts a diameter of 1.75mm with a remarkable dimensional accuracy of + / – 0.03 mm. Each spool weighs 1 kg (2.2lbs).

3To ensure optimal performance, our filament undergoes complete drying for 24 hours before packaging. It is vacuum-sealed with desiccants in a nylon resealable bag, guaranteeing a clog-free and bubble-free printing experience.

​​Harmonize effortlessly with all common 1.75mm FDM 3D printers, thanks to our high-quality manufacturing standards, precise diameter tolerance of +/- 0.03mm, and consistent production accuracy.

5We prioritize your satisfaction and offer professional after-sales service for every SUNLU 3D filament purchase. Count on our considerate and reliable support.

Parameter Material:

Glow in Dark PLA (PLA Based) Wire Diameter: 1.75/3.0MM Tolerance: ±0.02MM Printing Temperature: 200-210℃ Substrate Temperature: No heating needs coating with glue; Heating 50-65℃ cannot be coated with glue Tensile Force KGF: 11-16 (Enterprise Standard 23℃, Wire Diameter 1.75 mm) Melt Index: 7-9g/10min (190℃, 2.16Kg) (Refer to GB/T 3682.1-2018) Elongation at Break: 4% (Enterprise Standard 23℃, Wire Diameter 1.75 mm) Melting Point: 165-180℃ Heat Distortion Temperature: 55℃ Density g/cm³: 1.24 Water Absorption: 0.5% Suggested Printing Speed: 50-100MM/s Bubble: 100% Zero Bubble Net Weight: 1 KG/roll Gross Weight: 1.3 KG / roll Length: 1.75MM(1KG)=330M, 3.0MM(1KG)=330M

Incl. tax Excl. tax
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.

No fields found, please go to settings & save/reset fields