Phrozen TR300 Ultra-High Temp
Specification:
- Volume: 1Kg per bottle
- XY Planar Resolution: 0.035 mm
- Recommended Layer Height: 30-100um
- Way to Clean: Use alcohol spray to clean and air-gun to dry it. Avoid immersion to alcohol for over 30 seconds.
Performance:
- Weight: 1kg per bottle
- Density: 1.17 g/cm3
- Viscosity: 120-200 cps
- Surface Hardness: 80 Shore D
- UTS: 32 MPa
- EAB: 2 %
- Tensile Modulus: 1857 MPa
- Izod Notched Impact Strength: 8 KJ/m2
- Tg: 220 °C
- HDT @0.45MPa: 190 °C
Precautions:
- Way to Rinse: Clean with alcohol spray with air gun. DO NOT immerse model into alcohol for long time.
- Use and preserve resins in room temperature, and in dark and ventilated conditions
- Shake well before each use
- After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
- Keep resin away from kids and away from direct sunlight exposure
- Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
- DO NOT dump resin. Please cure it and treat it as general plastic garbage.
- After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year