Dark Light
, ,

Phrozen Castable Resin W40 Orange 500g

Phrozen
Availability:

In stock


Phrozen Castable Resin W40 Orange 3D printing resin is developed for reliable casting of large pieces, signets, school ring, or bracelets with high details.

$ 159.42 incl. tax
$ 129.61 excl. tax

In stock

Phrozen Castable Resin W40 Orange

Benefits

  • 40% wax content.
  • Formulated for casting medium to large pieces.
  • Low shrinkage, high precision. Smooth and crisp surface finishing.
  • With a minimal number of gates, you can easily cast anything you desire. Set up your printed models and clean up casted 3D models effortlessly.
  • No foul/strong odor

Specs

  • Quantity: 500g per bottle
  • Viscosity: 500-550 cP
  • Density: 1.05 g/cm3
  • Surface Hardness: 60 Shore D
  • Recommended layer height: 50 um
  • Verified clean burnout with these investments: “Prestige Optima”, “Plasticast” and “Ultravest Maxx”
  • Ash content: 0.0-0.1% (ASTM E1131; TGA)

*All specifications have been tested in a laboratory. Please note that certain specifications may be subject to change without prior notice.

Precautions

  • Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
  • After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
  • Keep resin away from kids and away from direct sunlight exposure.
  • Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
  • DO NOT dump resin. Please cure it and treat it as general plastic garbage.
  • After receiving your Phrozen resins, we strongly recommend using them ASAP as unopened resins only have a shelf life of one year.

You may also like…

Incl. tax Excl. tax
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.

No fields found, please go to settings & save/reset fields