With a specially formulated ingredients, it can create super-detailed and intricate models at 8K resolution. It is matched with Phrozen 8K 3D printer ultra-high resolution for perfect designs every time!
€ 46.00€ 70.77 incl. VAT 21%
Out of stock
Join WaitlistWe will inform you when the product arrives in stock. Please leave your valid email address below.
High precision and low shrinkage: Phrozen Aqua Snow-Gray 8K resin has the characteristics of low shrinkage, the printed objects will not be deformed or warped, and the printed objects will form stably.
Moderate viscosity, low odor: Phrozen Aqua 8K resin has low viscosity, easy to handle and easy to clean, and will not have annoying odors that will affect the environment during printing.
Wide range of printing applications: The printed product has high hardness and a toughness, suitable for printing figurines, and also suitable for product proofing.
Specs
Capacity: 1 kg per can
Density: 1.10 g/cm3
Viscosity: 280-380cP
Surface Hardness: 82 Shore D
Tensile strength at break: 43 MPa
Tensile modulus: 1730 MPa
Elongation at break: 8 %
Izod impact strength (notch): 10.00 J/m
Heat distortion temperature (0.45 MPa): 77 ℃
Precautions
Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
Keep resin away from kids and away from direct sunlight exposure.
Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
DO NOT dump resin. Please cure it and treat it as general plastic garbage.
