No products in the cart.
Fiberlogy, Filament Dryers, Filaments, Uncategorized
Fiberlogy R PLA Anthracite
Availability:
In stock
R PLA properties:
- biodegradability
- very good adhesion between the print layers
$ 26.91 incl. tax $ 21.88 excl. tax
In stock
LIMITED EDITION: The accessibility of filaments depends on objective factors, such as the amount of raw material available on the market. Therefore, the manufacturer cannot guarantee the continued availability of the goods. R PLA filament may contain traces of glitter and vary in the intensity of colouring, which results from the raw material used in a given batch.
How to print R PLA?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
| DIAMETER | DIAMETER TOL | OVAL TOL | PRINTING TEMP | TABLE TEMP |
|---|---|---|---|---|
| 1.75 mm | +/- 0.02 mm | + 0.01 mm | 210-230°C | 50-70°C |
| Weight | 0.75 kg |
|---|
| Nozzle Temperature | 210-230°C |
| Bed Temperature | 50-70°C |
| Closed chamber | not required |
| Fan | 75-100% |
| Flowrate | 95-105% |
| Printing Speed | < 100 mm/s |
| Surface | glass, masking tape |
| Retraction (direct) | 2-3 mm |
| Retraction (bowden) | 4-6 mm |
| Retraction Speed | 20-45 mm/s |
| Drying conditions | 50°C / 4h |
| Note | Recommended minimum 0,5 mm nozzle |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.