No products in the cart.
eSun, eSun PLA+
eSun PLA Clear 1KG
Availability:
Out of stock
PLA
PLA is an environment-friendly material that is easy to print and has smooth surface.Compared with ABS, PLA has higher rigidity and strength similar to PC, and does not need to close the cavity, low shrinkage rate, no warping, no cracking, and can print large size model;No pungent smell when printing, safe and environmental protection.Approved by FDA, safer to use;It can be used for conceptual model, rapid prototyping, and metal parts casting.
$ 21.13 incl. VAT 0%
Out of stock
Join Waitlist
We will inform you when the product arrives in stock. Please leave your valid email address below.
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | PLA |
| Density(g/cm3) | 1.2 |
| Heat Distortion Temp(℃,0.45MPa) | 53 |
| Melt Flow Index(g/10min) | 3.5（190℃/2.16kg） |
| Tensile Strength(MPa) | 72 |
| Elongation at Break(%) | 11.8 |
| Flexural Strength(MPa) | 90 |
| Flexural Modulus(MPa) | 1915 |
| IZOD Impact Strength(kJ/㎡) | 5.4 |
| Durability | 4/10 |
| Printability | 9/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 190 – 230℃ Recommended temperature：215℃ |
| Bed temperature(℃) | 45 – 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
Related products
- DWS Systems, Resins
DWS Systems DS3000
- High-Precision Fit: Achieve precision and accuracy like never before with our SLA 3D printing material.
- Design, Analyze, and Develop: Seamlessly perform design, analysis, and development tasks directly on your model.
- Class I Biocompatible Material: Our material is classified as Class I, suitable for surgical guides, adhering to Rule 5, Annex IX of Medical Devices Directive 93/42/EEC.
- 0,33g cartridges: for XFAB 3D Printers
SKU: 18531
