No products in the cart.
eSun, eSun HIPS
eSun HIPS Red 1KG
Availability:
Out of stock
It is a printing material that is completely soluble in limonene, there will be no residue on the surface of the model after dissolution, and the contact surface is smooth and flat; its printing performance is similar to ABS, and can be used for ABS, PETG and other materials to print extremely complex shapes or a supporting material having the shape of a partially enclosed chamber; suitable for multi-nozzle printers.
$ 18.84 incl. tax $ 15.32 excl. tax
Out of stock
Description
It is a printing material that is completely soluble in limonene, there will be no residue on the surface of the model after dissolution, and the contact surface is smooth and flat; its printing performance is similar to ABS, and can be used for ABS, PETG and other materials to print extremely complex shapes or a supporting material having the shape of a partially enclosed chamber; suitable for multi-nozzle printers.
Sellingpoint
| Solubility Support Heat resistance | High toughness High impact resistance |
| Filament Properties Table | |
| 3D PRINTING FILAMENT | HIPS |
| Density(g/cm3) | 1.05 |
| Heat Distortion Temp(℃,0.45MPa) | 80 |
| Melt Flow Index(g/10min) | 3(200℃/5kg) |
| Tensile Strength(MPa) | 27 |
| Elongation at Break(%) | 55 |
| Flexural Strength(MPa) | 39 |
| Flexural Modulus(MPa) | 2280 |
| IZOD Impact Strength(kJ/㎡) | 11 |
| Durability | 7/10 |
| Printability | 6/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 230 – 270℃ Recommended temperature：250℃ |
| Bed temperature(℃) | 100 – 115°C |
| Fan Speed | 0% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Required |
| Recommended Build Surfaces | Glass plate, PVP solid glue, high temperature tape |
