No products in the cart.
eSun, eSun esilk PLA
eSun eSilk PLA filament gold 1kg
Availability:
Out of stock
The model printed by silk pla filament has shinny and silk luster texture.The pla silk filament’s printing surface is smooth without layer patterns.
$ 20.77 incl. VAT 0%
Out of stock
Join Waitlist
We will inform you when the product arrives in stock. Please leave your valid email address below.
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | eSilk-PLA |
| Density(g/cm3) | 1.21 |
| Heat Distortion Temp(℃,0.45MPa) | 50 |
| Melt Flow Index(g/10min) | 4.8（190℃/2.16kg） |
| Tensile Strength(MPa) | 52 |
| Elongation at Break(%) | 14.4 |
| Flexural Strength(MPa) | 65 |
| Flexural Modulus(MPa) | 1447 |
| IZOD Impact Strength(kJ/㎡) | 5.86 |
| Durability | 4/10 |
| Printability | 9/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 190 – 230℃ Recommended temperature：210℃ |
| Bed temperature(℃) | 45 – 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
