Dark Light
,

eSun ePA12-CF natural 1KG

eSun
Availability:

Out of stock


 

 

$ 102.75 incl. tax
$ 83.54 excl. tax

Out of stock

Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.

No fields found, please go to settings & save/reset fields

ePA12-CF

It is a material developed by eSUN and LUVOCOM based on PA12, added with 15% carbon fiber, greatly enhances the strength, rigidity and toughness of nylon, and can be used as a substitute for metal in many occasions; low water absorption rate,less affected by humidity and temperature for printing parts’dimension; self-lubricating and wear-resistant properties make it suitable for printing gears; high temperature resistance, continuous using temperature of parts can reach 120℃, short-term use temperature can reach 160℃; low shrinkage, not easy to warp and crack during printing, and the printing surface is matte and delicate.

Specs:

Low moisture absorption

Heat resistance

High strength

Abrasion resistance

High toughness

High dimensional stability

High rigidity

Matte surface effect

High impact resistance

Excellent printability

Chemical resistance

 

Filament Properties Table
3D PRINTING FILAMENTePA12-CF
Density(g/cm3)1.24
Heat Distortion Temp(℃,0.45MPa)94.1
Melt Flow Index(g/10min)8.91(270℃/2.16kg)
Tensile Strength(MPa)108.18
Elongation at Break(%)9.02
Flexural Strength(MPa)116.58
Flexural Modulus(MPa)3335
IZOD Impact Strength(kJ/m2)11.33
Durability10/10
Printability8/10
Recommended printing parameters
Extruder Temperature(℃)270 – 300℃

Recommended temperature:280℃

Bed temperature(℃)45 – 60°C
Fan Speed0%
Printing Speed40 – 100mm/s
Heated BedOptional
Recommended Build SurfacesMasking paper, PVP solid glue, PEI
Weight1 kg
Brands

Incl. tax Excl. tax
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.

No fields found, please go to settings & save/reset fields