Dark Light

eSun ABS+ 2.85 Gray 1KG


In stock


Based on the modification of ABS material, it has higher mechanical properties, lower odor and lower shrinkage rate than conventional ABS materials. With high toughness and high impact resistance, ABS+ can be used to print sturdy and durable parts; low VOC volatile content, low odor during printing, comfortable printing without pressure; low shrinkage, not easy to warp and crack during printing.

Selling point

Heat resistance
Sturdy and durable
High toughness
Low odor

Low shrinkage
High impact resistance
Excellent printability

$ 18.30 incl. tax
$ 14.88 excl. tax

In stock

Filament Properties Table
Heat Distortion Temp(℃,0.45MPa)73
Melt Flow Index(g/10min)15(220℃/10kg)
Tensile Strength(MPa)40
Elongation at Break(%)30
Flexural Strength(MPa)68
Flexural Modulus(MPa)1203
IZOD Impact Strength(kJ/㎡)42
Recommended printing parameters
Extruder Temperature(℃)230 – 270℃
Recommended temperature:240℃
Bed temperature(℃) 95 – 110°C
Fan Speed 0%
Printing Speed 40 – 100mm/s
Heated Bed Required
Recommended Build SurfacesHigh temperature tape, PVP solid glue
Incl. tax Excl. tax
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.

No fields found, please go to settings & save/reset fields