CROWNTEC for NextDent

Resin for printing permanent crowns, veneers, inlays and onlays

CROWNTEC is a premium composite resin that can be used for the additive manufacturing of biocompatible fixed dentures including crowns, inlays, onlays, veneers and false denture teeth. This FDA (510(k)) approved, CE Marked Class IIa medical product offers best-in-class properties.

As part of NextDent’s solutions for digital dentistry, dental laboratories and clinics are able to make the above prosthetic restorations, which are 30% stronger than those produced using conventional methods (while reducing material waste)

CROWNTEC is available in five tooth shades to match the patient’s teeth for natural-looking aesthetics, including SW (Bleach), B1, A1, A2 and A3 VITA® Shade Guide.

Consistency:     Medium viscous, homogeneous

Shade:            According to the VITA® shade guide

Curing depth   (DIN EN ISO 4049) ≥ 1.5mm

Flexural strength      (DIN EN ISO 4049) > 130 MPa

Module E           (DIN EN ISO 4049) > 4000 MPa

Barcol hardness    > 40

Shelf life      3 years

Medical device     class IIa

Operation

• Suggested to use the resin indoor under ventilated situation.
• Avoid exposure to sunlight
• Store the resin in opaque bottles
• Do not mix used and non-used resin
• Keep away from kids.
• Do not dump the resin. Place cured resin and recycle it as general plastic garbage.

Safety Rules

• Do not eat or swallow the resin. Visit hospital if necessary.
• Wear protective goggles to avoid of eye contact with resin. Wash your eyes with water and go to hospital if necessary.
• Resin might cause slight irritation to skin or may cause allergy reactions. Wear protective gloves when handling the resin. Stop using if allergy occurred.
• Resin has a slight odor. We strongly recommend to use it under ventilated condition.
• Suggested safety wear: gloves, mask, goggles, and lab coat.
• Keep resin in room temperature (15 – 35C) and dry environment.