Spray adhesive for 3D printer platform Hegron 300 ml
In stock
Hegron spray is an adhesive for the working platform of FDM 3D printers, which increases the adhesion of the first layer and effectively
reduces the peeling of prints from the table. A thin, even layer of spray improves print stability and increases the repeatability of results –
especially with larger and more demanding models.
€6.00 incl. VAT 23%
In stock
Spray adhesive for 3D printer platform Hegron 300 ml - Specification
Net weight: 0.33kgTechnical specifications
| Product type | Spray – adhesive/adhesive agent for the build platform (FDM/FFF) |
| Application | Improves first-layer adhesion, reduces delamination and warping |
| Form | Aerosol (spray) |
| Surface compatibility | Glass / FDM build plates / spring plates / PEI (compatibility depends on the printer and surface – a small-scale test is recommended) |
| Application method |
Shake for 10–20 seconds, spray a thin layer from a distance of approx. 15–25 cm onto a clean, dry surface. Remove excess by wiping and reapplying a thin layer. |
| Cleaning the platform | [Complete as per the manufacturer’s instructions; usually: warm water with a mild detergent or IPA – depending on the table surface] |
| Safety precautions |
Aerosol product – use in a well-ventilated area, keep away from sources of ignition and high temperatures, store in accordance with the instructions on the packaging. |
Hegron spray – revolutionary adhesion to the FDM 3D printer table
Adhesion problems are one of the most common reasons for failed FDM prints: peeling corners, warping,
layer shifts and wasted time. Hegron Spray is a specialised adhesive for the work platform,
that creates a thin, even layer to increase the adhesion of the first layer. This ensures that the print remains stable
from start to finish – no more nervous monitoring or reworking.
Why does Hegron work better?
- Stable adhesion of the first layer – minimises the risk of peeling and curling edges.
- Even coating – the spray allows you to quickly cover the table with a thin layer without streaks or lumps.
- Less waste, more successful prints – no more “half-successful” models and wasted filament.
- Easy to repeat the process – you control the adhesion exactly when you need it.
- Versatile application – works well for everyday printing and larger, more difficult models.
Practical application
Hegron is especially recommended when printing elements with a large base area, sharp corners, thin walls
or models requiring maximum stability on the table. It is also a great choice when you want to reduce warping and improve
the repeatability of results on different work surfaces (e.g. glass, spring steel, PEI coatings – depending on the printer).
Advantages over “home” methods and substitutes
Tape, glue sticks or random agents often result in an uneven layer, make a mess, require frequent cleaning and do not guarantee
repeatability. Hegron spray provides fast, controlled table coverage and a predictable effect:
better adhesion at the crucial moment, i.e. when building the first layers.
How to use it for best results?
- Clean the work platform (e.g. with isopropyl alcohol) and leave to dry.
- Shake the container for approx. 10–20 seconds.
- Spray a thin layer from a distance of approx. 15–25 cm (using short “sprays”).
- Wait a moment for the layer to stabilise, then start printing.
- If necessary, add a minimal amount of product – less is better (a thin layer works best).
If you want to print more reliably, faster and with fewer failed starts, Hegron Spray is a simple upgrade
that really changes the comfort of working with an FDM printer.
