Dark Light
, ,

Phrozen Water-Washable Resin Model Gray 1kg


In stock

Designed to be easily cleaned by water, Phrozen’s Water-Washable Resins are sturdy, durable, and print with speed.

Customized for a 405nm LCD printer, the Water-Washable Resin takes only 7 seconds for cure time using the Shuffle XL and 1.5 seconds using Phrozen’s Sonic printers.

This resin works best for printing 3D figurines as well as product prototypes.

$ 47.01 $ 55.73 incl. tax
$ 38.22 $ 45.31 excl. tax

In stock

Phrozen Water-Washable Resin Model Gray

  • Weight: Rapid Black 1KG  per bottle / Model Gray 1KG per bottle
  • XY Resolution: 50 µm
  • Recommended Layer Height: 30-100 um
  • Ways to Rinse: Clean with water & spray with air gun.
  • Viscosity: 149 cps
  • Proportion: 1.05
  • Tg:87 °C
  • Elongation: 14 %
  • Break Value: 21 MPa
  • Surface Hardness: Shore 80D
  • I-Zod Impact:1.52 KJ/m2
  • Use and preserve resins in room temperature, dark, and ventilated condition.
  • Shake well before use.
  • After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
  • Keep resin away from kids and away from direct sun-light exposure.
  • Wear gloves and masks when using resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
  • DO NOT dump resin. Please cure it and treat it as general plastic garbage.
  • After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year


Previous lowest price was $ 43.05.

SKU: 22884 Categories: , , Tags: , , , , , , ,
Weight1.2 kg

Incl. tax Excl. tax
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.

No fields found, please go to settings & save/reset fields