Phrozen Rock Black Resin (500g)

73.00 60.00 (vat excl.)

Phrozen Rock Black Resin is a great engineering resin for strong detailed prints, it’s stronger then ABS Like Grey and ABS Like White and it has less smell. You can drive a screw into it and it won’t break!

Out of stock

Specification & Performance
  • Weight: 500g per bottle
  • XY Resolution: 0.047 mm
  • Layer Height / Parameter: 12 sec @ 50 um
  • Post treatment: Clean with alcohol and compressed air
  • Do not immerse printed part into alcohol over 30 sec.
  • Compatible Printers: Phrozen Shuffle, Shuffle XL, Make, Make XL
  • Application: Engineering Components
  • Key Performance:
    • Viscosity: 890 cps (25C)
    • Density: 1.25 g / cm3
    • Tensile Stress (Break): 150 MPa
    • Elongation: 2.1%
    • Tensile Modulus: 1.62 GPa
    • Hardness: Shore 82D
    • Heat Deflection Temperature @0.45MPa: >150C
  • Suggested to use the resin indoor under ventilated situation.
  • Avoid exposure to sunlight
  • Store the resin in opaque bottles
  • Do not mix used and non-used resin
  • Keep away from kids.
  • Do not dump the resin. Place cured resin and recycle it as general plastic garbage.
Safety Rules
  • Do not eat or swallow the resin. Visit hospital if necessary.
  • Wear protective goggles to avoid of eye contact with resin. Wash your eyes with water and go to hospital if necessary.
  • Resin might cause slight irritation to skin or may cause allergy reactions. Wear protective gloves when handling the resin. Stop using if allergy occurred.
  • Resin has a slight odor. We strongly recommend to use it under ventilated condition.
  • Suggested safety wear: gloves, mask, goggles, and lab coat.
  • Keep resin in room temperature (15 – 35C) and dry environment.

Weight 1 kg
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.
Scroll to Top