No products in the cart.
Phrozen Castable Resin W40 Orange
Benefits
- 40% wax content.
- Formulated for casting medium to large pieces.
- Low shrinkage, high precision. Smooth and crisp surface finishing.
- With a minimal number of gates, you can easily cast anything you desire. Set up your printed models and clean up casted 3D models effortlessly.
- No foul/strong odor
Specs
- Quantity: 500g per bottle
- Viscosity: 500-550 cP
- Density: 1.05 g/cm3
- Surface Hardness: 60 Shore D
- Recommended layer height: 50 um
- Verified clean burnout with these investments: “Prestige Optima”, “Plasticast” and “Ultravest Maxx”
- Ash content: 0.0-0.1% (ASTM E1131; TGA)
*All specifications have been tested in a laboratory. Please note that certain specifications may be subject to change without prior notice.
Precautions
- Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
- After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
- Keep resin away from kids and away from direct sunlight exposure.
- Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
- DO NOT dump resin. Please cure it and treat it as general plastic garbage.
- After receiving your Phrozen resins, we strongly recommend using them ASAP as unopened resins only have a shelf life of one year.
