Phrozen Aqua Clear Resin 1kg
- Weight: 1kg per bottle
- Density: 1.11 g/cm3
- Viscosity: 50-100 cps
- Surface Hardness: 74 Shore D
- UTS: 22 MPa
- Elongation at Break, EAB: 14 %
- Tensile modulus: 735 MPa
- Flexural strength: 29 MPa
- Flexural modulus: 701 MPa
- Izod notched impact strength: 21 J/m
- Way to Rinse: Clean with alcohol spray with air gun. DO NOT immerse model into alcohol for long time.
- Use and preserve resins in room temperature, and in dark and ventilated conditions
- Shake well before each use
- After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
- Keep resin away from kids and away from direct sunlight exposure
- Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
- DO NOT dump resin. Please cure it and treat it as general plastic garbage.
- After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year