Spec & Properties
- Volume: 500g per bottle
- XY Planar Resolution: 0.050 mm
- Z Resolution (Layer Height): 30-100um
- Property: High hardness and toughness, good resolution. Its light color is suitable for post process, like painting.
- Post treatment: Clean with alcohol and compressed air
- Suitable for: LCD 3D Printer
- Application: General modeling & Industrial prototype proofing
- Suggested to use the resin indoor under ventilated situation.
- Avoid exposure to sunlight
- Store the resin in opaque bottles
- Do not mix used and non-used resin
- Keep away from kids.
- Do not dump the resin. Place cured resin and recycle it as general plastic garbage.
- Do not eat or swallow the resin. Visit hospital if necessary.
- Wear protective goggles to avoid of eye contact with resin. Wash your eyes with water and go to hospital if necessary.
- Resin might cause slight irritation to skin or may cause allergy reactions. Wear protective gloves when handling the resin. Stop using if allergy occurred.
- Resin has a slight odor. We strongly recommend to use it under ventilated condition.
- Suggested safety wear: gloves, mask, goggles, and lab coat.
- Keep resin in room temperature (15 – 35C) and dry environment.