Product advantage:
Non brittle
Anti-scratch, great weathering
Super strong with tenacity
Suitable for different post processing like drilling, tapping, assembling etc.
Non VOC, RoHS, Reach, En71-3 certificated
Compatible for most 3D printer
Technical specification：
| Flexural modulus：979.24 Mpa ±10% | Elongation at break：35.44% ±10% |
| Flexural strength ：44.15 MPa ±10% | Hardness(Shore D)：80-88 D ±10% |
| Tensile strength：3836Mpa ±10% | Tensile modulus：447.12 Mpa |
| Viscosity：300-550MPa·s | Density：1.05—1.25 g/cm3 |
| maximum pulling strength: 1595.05N ±10% | Notched impact strength: 454.37 j/m ±10% |
Printing Parameters
- You will find the product photos above.
Various precautions regarding the resin:
1. Storage environment: Store in cool and dry place, and avoid sunlight, recommended temperature at 25-30 degrees Celsius.
2. Preparation before use: Shake the resin well and leave it for 30 minutes before use. Allow to stand for 30 minutes to eliminate air bubbles that generated during the shaking process.
3. Environmental conditions during use: The ambient temperature is recommended to be controlled at 25-30 degrees Celsius, and during the printing should avoid daylight.
