JAMGHE Tough Resin Gray

53.89$ (vat excl.)

Super Low odor

Colors can be mixed for new colors

High detail prints

High hardness with tenacity 

Non VOC, RoHS certificated

Compatible for most 3D printer

Availability: In stock

Technical specification

Flexural modulus:1.882-2.385MpaElongation at break:4-10%
Flexural strength :59-70MPaHardness(Shore D):85-88 D
Hot deformation temp.:65℃Glass transition temp.:100℃
Thermal expansion:95*E-6Density:1.05—1.25 g/cm3
Volume shrinkage:3.72%-4.24%Notched impact strength:44-49j/m
Linear shrinkage:1.05-1.35%Viscosity:100-450MPa·s   
Tensile strength:36-52MPa
Tensile modulus:1.779—2.385 MPa

Printing Parameters 

  • You will find the product photos above.

Various precautions regarding the resin:

1. Storage environment: Store in cool and dry place, and avoid sunlight, recommended temperature at 25-30 degrees Celsius.

2. Preparation before use: Shake the resin well and leave it for 30 minutes before use. Allow to stand for 30 minutes to eliminate air bubbles that generated during the shaking process.

3. Environmental conditions during use: The ambient temperature is recommended to be controlled at 25-30 degrees Celsius, and during the printing should avoid daylight.

Weight1 kg

Gray, Clear, White

You may also like…

Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.
Scroll to Top