No products in the cart.
eSun, eSun PLA+
eSun PLA Natural 1KG
Availability:
In stock
PLA
PLA is an environment-friendly material that is easy to print and has smooth surface.Compared with ABS, PLA has higher rigidity and strength similar to PC, and does not need to close the cavity, low shrinkage rate, no warping, no cracking, and can print large size model;No pungent smell when printing, safe and environmental protection.Approved by FDA, safer to use;It can be used for conceptual model, rapid prototyping, and metal parts casting.
$ 20.32 incl. tax $ 16.52 excl. tax
In stock
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | PLA |
| Density(g/cm3) | 1.2 |
| Heat Distortion Temp(℃,0.45MPa) | 53 |
| Melt Flow Index(g/10min) | 3.5（190℃/2.16kg） |
| Tensile Strength(MPa) | 72 |
| Elongation at Break(%) | 11.8 |
| Flexural Strength(MPa) | 90 |
| Flexural Modulus(MPa) | 1915 |
| IZOD Impact Strength(kJ/㎡) | 5.4 |
| Durability | 4/10 |
| Printability | 9/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 190 – 230℃ Recommended temperature：215℃ |
| Bed temperature(℃) | 45 – 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
