Filament for 3D printer ELEGOO PLA Galaxy Blue 1.75 mm 1 kg - Specification
Color: BlueFilament type: PLAFilament Diameter: 1,75mmNet weight: 1kgBrands: ElegooELEGOO PLA Galaxy Filament (Peacock Blue)
ELEGOO filament in Peacock Blue attracts attention with its intense colour and subtle glittery sheen. Light-reflecting particles give the surface a unique character, making it ideal for decorations, figurines and projects that need to stand out. The product is based on PLA (polylactide – biodegradable plant-based plastic), and each spool contains 1 kg of material.
Printing without surprises
Thanks to its very precise diameter of 1.75 mm and dimensional tolerance of ± 0.02 mm, the filament is fed into the extruder evenly and without jamming. The finished models come out of the printer smooth, well-reproduced and free of defects typical of less stable filaments, such as air bubbles or stringing. Glitter additives do not adversely affect printing parameters.
Practical and ready to use
Each spool is machine-wound, manually checked and vacuum-packed with a moisture absorber, ensuring freshness and readiness for use immediately after opening. Galaxy PLA works with most FDM (fused deposition modelling) printers that support 1.75 mm diameter filament. It is a good choice for both beginners and more experienced users.
General
| Manufacturer | ELEGOO |
|---|---|
| Model | 50.203.0261 |
| Colour | Peacock Blue |
| Weight | 1 kg |
Recommended print settings
| Pre-print drying settings | 55 ± 5°C |
|---|---|
| Ambient temperature and humidity | ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) |
| Nozzle temperature | 190 – 230°C |
| Table temperature (depending on printer and surface) | 35–65°C |
| Type of working surface | Textured PEI plate (polyetherimide – a durable, well-adhering material used as a base for 3D prints) or other compatible surface |
| Print speed | below 280 mm/s |
Physical properties
| Density | 1.21 g/cm³ |
|---|---|
| Melting point | 162°C |
| Deflection temperature under load | 56°C |
| Softening temperature (Vicat test) | 62°C |
Mechanical properties
| Tensile strength (XY – measurement taken in the horizontal plane of the print, where the material is strongest) | 38 ± 3 MPa |
|---|---|
| Elongation at break (XY) | 8.7% ± 1.2% |
| Flexural strength (XY) | 75 ± 2 MPa |
| Flexural modulus (XY) | 2719 ± 179 MPa |
| Impact strength (XY) | 56.3 ± 3.5 kJ/m² |
