AnyCubic Tough Resin 2.0 (Black) - Specification
Resin type: ToughBrands: AnycubicNet weight: 1kgResolution: 4KColor: BlackAnyCubic Tough Resin 2.0 (Black)
AnyCubic resin is a unique plastic that exhibits increased strength. It is relatively flexible and resistant to cracking, making it possible to also print miniature components and thin models. What’s more, finished models made with this resin are less likely to be damaged, even after a fall from height. Tough Resin 2.0 was created with environmentally friendly ingredients that are non-irritating and do not emit intense odours. It is compatible with most LCD 3D printers.
The perfect choice for perfectionists
Tough Resin 2.0 is perfect for prints that require more precision. It is suitable for printing in the 365nm to 405nm wavelength range, allowing optimal results to be achieved. The resin also exhibits less shrinkage. As a result, your models are full of detail with a perfect surface finish – especially when used in conjunction with AnyCubic printers.
Physical and Chemical Properties:
| UV wavelength: | 365-405 nm |
|---|---|
| Density: | 1.10-1.15 g/cm³ |
| Viscosity: | 450-500 cPimPa-s |
| Hardness: | 82-84D |
| Tensile strength: | 30-42 MPa |
| Extension at fracture: | 60-72% |
| Shrinkage at forming: | 5.1-6.2% |
| Bending strength: | 42-52 MPa |
| Modulus of elasticity at bending: | 1500-2000 MPa |
| Heat distortion resistance temperature: | 50-55°C |
| Exposure time for bottom layer: | 20-40s |
| Standard exposure time: | 1.5-3s (for colour screens 8s) |
| Resin cleaning: | Alcohol |
| Shelf life: | 1.5 years |
| Colour | black |
Recommended Printing Parameters for Various Anycubic 3D Printer Models (Photon Mono M3 Pro, Photon Mono 6K, Photon Ultra, etc.):
| Layer thickness: | 0.05 mm |
|---|---|
| Exposure time: | 1.5s to 3.6s |
| No-exposure time: | 1s |
| Exposure time of lower layers: | 20s to 35s |
| Number of lower layers: | 5-6 |
| Anti-aliasing: | 1 |
| Z Lift distance: | 5mm to 10mm |
| Z Lift speed: | 2mm/s to 6mm/s |
| Z Retract Speed: | 2mm/s to 6mm/s |
